Skip to Main Content
It looks like you're using Internet Explorer 11 or older. This website works best with modern browsers such as the latest versions of Chrome, Firefox, Safari, and Edge. If you continue with this browser, you may see unexpected results.

Research Guides

3D Printing Resources and Tools: Labs and Services at UofT

Software, model libraries, books, labs and services at U of T, Toronto and online

3D Printing at UofT

At the University of Toronto, there are numerous maker labs that provide 3D printing training and services. Please use the table below to find specific labs and equipment.

Please note that during the pandemic some labs are closed or have only limited service and are still working on reopening plans. Check their homepages for the most up-to-date policies and announcements. 

To find maker communities outside of UofT, see the Local/Online Communities and Services tab.

Maker Labs and Services at the University of Toronto

The following can be accessed by current U of T students, staff and faculty with a valid TCard, unless otherwise noted. Please click the headers to sort the table.

Location ⇅ Equipment ⇅ Type ⇅ Current Availability and Access ⇅ Contact
CFI 3D Facility PerkinElmer IVIS Spectrum
  • BMG PHERAstar FS
  • Cellomics Array Scan VTI
  • Meso Scale Discovery Sector 2400A
3D imaging Available;
open to the general public
a.hardy@utoronto.ca
Robarts Library Digital Studio LulzBot TAZ 6 3D printing Unavailable until further notice libraryhelp@utoronto.ca
University of Toronto Mississauga (ICUBE) Creality Ender 3 3D printing Unavailable until further notice icube.utm@utoronto.ca
MADLab, Gerstein SIC (B112)
  • 6 Google Cardboard headsets
  • RICOH 360 Camera
  • HTC Vive
VR equipment Unavailable until further notice madlab@utoronto.ca
MADLab, Gerstein SIC (B112)
  • iPad Pro
  • Apple pencil
  • tripod
  • wireless microphone
  • Apple pencil
  • backdrop
Studio equipment Unavailable until further notice madlab@utoronto.ca
MADLab, Gerstein SIC (B112) MakerBot Digitizer 3D scanning Limited on-demand 3D printing services;
available for research or academic projects with valid TCard
gerstein.3dprinting@utoronto.ca
MADLab, Gerstein SIC (B112) MakerBot Replicator 3D printing Limited on-demand 3D printing services;
available for research or academic projects with valid TCard
gerstein.3dprinting@utoronto.ca
MADLab, Gerstein SIC (B112) MakerBot Sketch 3D printing (remote service) Available; valid TCard required gerstein.3dprinting@utoronto.ca
Myhal Centre (Entrepreneurship Hatchery)
  • Ultimaker 2
  • ProJet 5500X
3D printing Available;
Hatchery members OR valid TCard required
3d@uofthatchery.ca
UTSC Library Makerspace
  • button maker
  • cricut machine
  • Singer sewing machine
  • Lego Mindstorms EV3
  • Lego Medium Creative Brick Box
  • Epson DS5000 scanner
  • Epson V850 scanner
  • button maker
  • cricut machine
  • Singer sewing machine
  • Lego Mindstorms EV3
  • Lego Medium Creative Brick Box
  • Epson DS5000 scanner
  • Epson V850 scanner
Miscellaneous Available; valid TCard required makerspace.utsc@utoronto.ca
UTSC Library Makerspace
  • Arduino starter kit
  • Raspberry Pi
Micro-controllers Available; valid TCard required makerspace.utsc@utoronto.ca
UTSC Library Makerspace
  • Canadian Studio Lighting and Backdrop Kits
  • Canon PowerShot SX420 IS Digital Camera
  • Kenuo 4K Camorder Camera
  • Seree Digital Camcorder Digital Camera
  • Olympus Digital Voice Recorder
  • Maono USB microphone kit
  • Studio DJ headphones
  • XIAOKOA Wireless Microphone
  • Amazon 60″ Tripod
  • Extension Cord
Studio equipment Available; valid TCard required makerspace.utsc@utoronto.ca
UTSC Library Makerspace
  • Dremel 3D45 3D printer
  • Flashforge Creator Pro 3D printer
3D printing Available; valid TCard required makerspace.utsc@utoronto.ca
UTSC Library Makerspace iMac with Adobe Creative Cloud Software Available; valid TCard required makerspace.utsc@utoronto.ca

3D printing services for U of T departments/faculties (restricted use)

Coming Soon: Centre for Entrepreneurship MakerSpace for Arts and Science 

The new facility will provide equipment for rapid development and prototype testing, and will include a 3D printer, laser cutter, electronics development and test, mechanical and hand tools, etc.