3D printing is now available at the UTM Library. Students in CCT419 can book time to print their 3d models by visiting this page https://library.utm.utoronto.ca/spaces/del and clicking on the Reservations by Request link on the top right.
Some notes about 3D printing:
You can book up to 4 hours for your print. If you require more time, please let me know. To estimate how long your print will take, you can use these tables as a reference:
Item: Mug
|
Ultimaker S3 |
Ender 3 |
Size: 50mm x 50mm x 50mm |
1 hour 35 minutes |
1 hour 45 minutes |
Size: 60mm x 60mm x 60mm |
2 hours 30 minutes |
3 hours |
Size: 75mm x 75mm x 75mm |
4 hours |
4 hours 45 minutes |
Size: 75mm x 75mm x 75mm |
4 hours 15 minutes |
5 hours |
Item: Calibration cube
|
Ultimaker S3 |
Ender 3 |
Size: 25mm x 25mm x 25mm |
1 hour |
1 hour |
Size: 40mm x 40mm x 40mm |
2 hours 45 minutes |
3 hours |
Size: 40mm x 40mm x 40mm |
2 hours 15 minutes |
2 hours 30 minutes |
Size: 50mm x 50mm x 50mm |
3 hours 45 minutes |
4 hours 15 minutes |
Some notes about 3D printing:
3D design and printing workflow
Below are general steps used to create and print 3D models: